Ceramic Coating Sacramento, CA
MAKE YOUR VEHICLE EXTREMELY GLOSSY & EASY TO WASH WITH A PROFESSIONAL CERAMIC COATING!
Automotive ceramic coating was designed to make your vehicle remain cleaner longer and also make them extremely easy to wash. Unlike traditional waxes that attract dirt, ceramic coating lasts for years & are self-cleaning. We can apply a ceramic coating to almost any surface on your vehicle from the exterior to the interior. Get a free quote today using the form or by calling us directly at (916) 514-1907.
GET A QUOTE IN SECONDS
Our

100% HAND CAR WASH
Using PH neutral soap and a clean wash mitt and safe towel to dry.
PAINT DECONTAMINATION
Clay bar treatment to mechanically decontaminate the paint followed by a chemical decontamination with iron removers.
LABOR INTENSIVE MACHINE PAINT CORRECTION
We must make your car's paint as close to perfect as possible so that we don't seal those defects under the coating.
SURFACE CLEANSING COATING PREP
We apply an alcohol-based cleansing solution to give the coating a proper surface to bond too. Unlike wax coatings bond to your clear coat.
TEDIOUS PANEL BY PANEL INSTALLATION
We apply the coating panel-by-panel with an applicator and special soft towels to prevent further damage.

Ceramic Coating Packages
1 YEAR COATING
$450
M $550 / L $650 / XL $750
- Hand wash
- Clay Bar Treatment
- Machine Polish
- 1 Year Coating Applied
- Duration = 8 hours
2 YEAR COATING
$699
M $799 / L $899 / XL $999
- Hand wash
- Clay Bar Treatment
- Machine Polish
- 2 year Coating Applied
- Duration = 8 hours
5 YEAR COATING
$899
M $1,099 / L $1,299 / XL $1499
- Hand wash
- Clay Bar Treatment
- Machine Polish
- 5 year Coating Applied
- Duration = 8 hours

Ceramic Coating Benefits
WATER SPOT RESISTANCE
Improved formulation to increase the resistance of water spotting on coated vehicles
DEEP GLOSS
Unmatched gloss that lasts years.
SUPERB HYDROPHOBIC QUALITY
Water contact angle that surpasses 110° and retaining close to this angle for a long period
EASE OF MAINTENANCE
The surface stays clean for a longer period thanks to the anti-fouling effect
What is it?
What is Ceramic Coating? Industry-grade coatings are a chemical polymer solution that is applied to the exterior of a vehicle to protect it from external paint damage. Typically applied by hand, it blends with the paint of your car and creates an additional hydrophobic layer of protection.
How long does it take to install?
The installation can take anywhere from 6-15 hours depending on the condition of your vehicles paint since most of the time is spent in paint correction pre-install.
How long does it last?
Professional coatings last anywhere from 6 months to 7+ years depending on the formula.
How much does it cost?
The cost ranges from $300 – $3000 depending on two factors. How much paint correction is required & how much durability is desired.
How do I maintain it?
The best way to maintain a coating is to hand wash your vehicle using a PH balanced soap diluted properly. You should consider drying the vehicle with a blower or extremely soft towel with little pressure.
How is it removed?
Removing requires labor intensive cutting and polishing with a machine polisher, pads, and abrasive compounds. You must be very careful to not go past the clear coat.